Belkin Stereo System F5U279 User Manual

Easy Transfer Cable for Windows® 7  
Don’t plug me in just yet.  
We need to do a few things first to get your computers ready to transfer  
your files and user accounts.  
Quick Start Guide  
F5U279  
 
i
1
Prepare your old computer  
Run Microsoft Windows  
Easy Transfer  
2
3
Connect your Belkin Easy  
Transfer Cable  
You will then be able to transfer your files and user accounts.  
 
Prepare your old computer  
1
Source  
Destination  
Easy Transfer Cable for Window 7™  
Computer with Windows 7  
Computer with Windows XP or  
Windows Vista®  
1. Insert the CD into your old computer.  
2. Locate the CD drive on “My Computer”.  
3. Double-click the “Belkin Easy Transfer Cable for Win7” software icon and follow the  
on-screen prompts.  
Note: You do not need to install this software on your  
Windows 7 computer.  
 
4. Select “Next” on your old computer.  
This program is now verifying the operating system compatibility and installing Windows  
Easy Transfer on to your computer.  
Note: If your operating system is not currently compatible, you will be prompted to install  
Windows Service Pack SP2 for Windows XP or SP1 for Windows Vista.  
 
5. Select “Finish” on your old computer.  
Note: If your computer prompts you to restart, select “Yes” and continue.  
 
i
1
2
3
Prepare your old computer  
Run Microsoft Windows  
Easy Transfer  
Connect your Belkin Easy  
Transfer Cable  
You will then be able to transfer your files and user accounts.  
 
Run Microsoft Windows  
Easy Transfer  
2
Source  
Destination  
Windows Easy Transfer  
Windows Easy Transfer  
Computer with Windows 7  
Computer with Windows XP  
or  
Windows Vista  
1. Launch Windows Easy Transfer on both computers.  
For computers with Windows XP or Windows Vista:  
Start > Programs > Windows Easy Transfer  
For computers with Windows 7:  
Start > Search programs and files  
type: Windows Easy Transfer  
 
2. Select “Next” on both computers.  
Computer with Windows XP  
or  
Windows Vista  
Computer with  
Windows 7  
 
3. Select “An Easy Transfer Cable” on both computers.  
Computer with  
Windows 7  
Computer with Windows XP  
or  
Windows Vista  
 
Source  
Destination  
Windows Easy Transfer  
Windows Easy Transfer  
Computer with Windows XP  
or  
Windows Vista  
Computer with  
Windows 7  
4. Go to your old computer.  
 
5. Select This is my old computer.  
Computer with  
Windows 7  
Computer with Windows XP  
or  
Windows Vista  
 
Source  
Destination  
Windows Easy Transfer  
Windows Easy Transfer  
Computer with  
Windows 7  
Computer with Windows XP  
or  
Windows Vista  
6. Go to your computer running Windows 7.  
 
7. Select This is my new computer.  
Computer with  
Windows 7  
Computer with Windows XP  
or  
Windows Vista  
 
8. Select I already installed it on my old computer.  
Computer with  
Windows 7  
Computer with Windows XP  
or  
Windows Vista  
 
9. Select “Next” on both computers.  
Computer with  
Windows 7  
Computer with Windows XP  
or  
Windows Vista  
 
10. When you see this screen, you are now ready to connect your Belkin Easy Transfer  
Cable to each computer.  
Computer with  
Windows 7  
Computer with Windows XP  
or  
Windows Vista  
 
i
1
2
3
Prepare your old computer  
Run Microsoft Windows  
Easy Transfer  
Connect your Belkin Easy  
Transfer Cable  
You will then be able to transfer your files and user accounts.  
 
Connect your Belkin Easy  
Transfer Cable  
3
Source  
Destination  
Windows Easy Transfer  
Windows Easy Transfer  
1
Computer with  
Windows 7  
Computer with Windows XP  
or  
Windows Vista  
2
1. Connect your Belkin Easy Transfer Cable to each computer using any available  
USB port.  
2. Use your Windows 7 computer to transfer your files and  
user accounts.  
 
Using Windows Easy Transfer  
John Doe’s Computer  
Shared Items  
1. Your Windows 7 computer will scan your old computer to determine which files can  
be transferred.  
 
John Doe’s Computer  
Shared Items  
2. You may now select what you would like to transfer from your old computer on to your  
new computer.  
To accept the defaults click “Transfer” to continue.  
If you would like to customize what is transferred, select “Customize”, or to modify how  
user accounts are transferred, select  
Advanced Options”.  
 
John Doe’s Computer  
Shared Items  
3. Your Windows 7 computer will now transfer your files and  
user accounts.  
 
4. The transfer is now complete. Click “Close” to finish.  
You may review what files were transferred by selecting  
“See what was transferred”.  
Windows Easy Transfer does not transfer any programs or applications. Any programs or  
applications will have to be reinstalled on your Windows 7 computer.  
 
Questions?  
Q:How do I get the Belkin Easy Transfer Cable to transfer applications and programs?  
A: Windows Easy Transfer currently does not support the transfer of applications  
or programs.  
Q:Why isn’t the Windows Easy Transfer software loading?  
A: Go to “Start > Programs” and locate the entry for “Windows Easy Transfer”. Click on  
this entry to launch the software and continue with the steps for using Windows Easy  
Transfer software. For Windows 7 computers, click “Start” and then enter “Windows  
Easy Transfer” in the “Search programs and files” dialog box.  
Q:My user account info and settings did not transfer.  
A: User account info and settings cannot be transferred if the source and destination  
operating systems are in different languages.  
Other questions?  
Please visit our website at:  
 
System Requirements  
Computer with Windows XP  
or  
Windows Vista  
Computer with  
Windows 7  
• Pentium® processor-based computer  
• An available USB port  
• Windows XP Service Pack 2 or Windows Vista  
Service Pack 1  
• 40MB hard-disk space  
• Pentium processor-based computer  
• An available USB port  
• Windows 7  
• CD-ROM drive  
 
Information  
Federal Communication Commission Interference Statement Subpart B  
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC  
COMPATIBILITY  
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare under  
sole responsibility that the product:  
F5U279  
To which this declaration relates:  
Has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment generates uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee  
that interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment  
off and on, the user is encouraged to try to correct the interference by one of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may cause undesired operation.  
FCC Caution: Any changes or modifications not expressly approved by the party responsible  
for compliance could void the user’s authority to operate this equipment.  
 
CE Declaration of Conformity  
We, Belkin International, Inc., declare under our sole responsibility that the F5U279, to which  
this declaration relates, has been tested and found compliant to EMC Council Directive  
2004/108/EC. The tests results are contained in test report kept on file in the department and  
are available upon request.  
Applicable Standard(s) used in demonstrating compliance to the CE requirements are:  
EN55022: 2006 (Class B)  
EN55024: 1998 + A1: 2001 + A2: 2003  
Belkin International, Inc., Limited Lifetime Product Warranty  
What this warranty covers.  
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product that  
the product shall be free of defects in design, assembly, material, or workmanship.  
What the period of coverage is.  
Belkin warrants the Belkin product for the lifetime of the product.  
What will we do to correct problems?  
Product Warranty.  
Belkin will repair or replace, at its option, any defective product free of charge (except for  
shipping charges for the product). Belkin reserves the right to discontinue any of its products  
without notice, and disclaims any limited warranty to repair or replace any such discontinued  
products. In the event that Belkin is unable to repair or replace the product (for example,  
because it has been discontinued), Belkin will offer either a refund or a credit toward the  
purchase of another product from Belkin.com in an amount equal to the purchase price of the  
product as evidenced on the original purchase receipt as discounted by its natural use.  
What is not covered by this warranty?  
All above warranties are null and void if the Belkin product is not provided to Belkin for  
inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines  
that the Belkin product has been improperly installed, altered in any way, or tampered with.  
The Belkin Product Warranty does not protect against acts of God such as flood, earthquake,  
lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence,  
abuse, damage due to low voltage disturbances (i.e. brownouts or sags), non-authorized  
program, or system equipment modification or alteration.  
 
2. Your Belkin Customer Service Representative will then instruct you on how to forward your  
receipt and Belkin product and how to proceed with your claim.  
Belkin reserves the right to review the damaged Belkin product. All costs of shipping the  
Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin  
determines, in its sole discretion, that it is impractical to ship the damaged equipment to  
Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect  
and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment  
to and from such repair facility and of such estimate shall be borne solely by the purchaser.  
Damaged equipment must remain available for inspection until the claim is finalized.  
Whenever claims are settled, Belkin reserves the right to be subrogated under any existing  
insurance policies the purchaser may have.  
How state law relates to the warranty.  
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE  
NO OTHER WARRANTIES, EXPRESSED OR, EXCEPTAS REQUIRED BY LAW,  
IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY,  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH  
IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS  
WARRANTY.  
Some states do not allow limitations on how long an implied warranty lasts, so the above  
limitations may not apply to you.  
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT,  
INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED  
TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY  
BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
This warranty gives you specific legal rights, and you may also have other rights, which  
may vary from state to state. Some states do not allow the exclusion or limitation of  
incidental, consequential, or other damages, so the above limitations may not apply to  
you.  
 
Easy Transfer Cable for Windows 7  
In this box  
Easy Transfer Cable For Windows 7™  
Don’t plug me in just yet.  
There are few things we need to do first to get your computers  
a
ready to transfer your files and user accounts  
Quick Start Guide  
Package Includes  
Quick Start Guide  
CD with Microsoft Windows Easy Transfer software  
Belkin Easy Transfer Cable for Windows 7  
BELKIN  
Belkin International, Inc.  
Los Angeles, CA 90220, USA  
310.898.1100  
Belkin Ltd.  
Tuggerah, Australia  
+61 (0) 2 4350 4600  
© 2009 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Microsoft,  
Windows, Windows Vista, and the Windows Vista Start button are either registered trademarks or trademarks of Microsoft Corporation in the  
United States and/or other countries. Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.  
 
F5U279  
|
8820-00235  

Black Box Network Card MDS932AE 10BT User Manual
Black Decker Saw BDCMTRS User Manual
Black Decker Vacuum Cleaner VM400 User Manual
Bosch Power Tools Laser Level PS90 1A User Manual
Broilmaster Outdoor Cart B100613 3 1203 User Manual
Brother All in One Printer DCP 153C User Manual
Butler Coffeemaker 645 003 User Manual
Campbell Hausfeld Welding System WT2531 User Manual
Canon Film Camera 2043A005 User Manual
Channel Vision Speaker IC612 User Manual