Preparing to Connect My Multifunction
To My Network
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
3
Connecting to the Network
Connect the PIXMA MX432 to Your Wireless Network
To re-establish communication on the network after changing the router / Access Point or when connecting to a different network, the settings
on the Multifunction need to be changed
Simply insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions On the
following screen, select the Start Setup Again option
4
Connecting to the Network
On the Connection Method Selection screen, be sure to select Wireless Connection
When the Printer Setup screen appears, click Next. You will be setting up the printer the same way as a first-time setup.
Follow the instructions until the Completion of Connection screen. It is not necessary to re-install the software. Click Next on the
Completion of Connection screen, then click Back, then Exit. Setup is now finished
5
Connecting to the Network
If you can’t find your CD-ROM, you may download the MX430 series Mini Master Setup, which includes the same step-by-step installation as the
CD-ROM, by following the instructions below:
2. Select the operating system and version of your computer (see example below).
3. Expand the ‘Drivers’ section, if necessary, by clicking the red triangle.
4. Click on the ‘MX430 series Mini Master Setup’ entry
5. After reading the details and disclaimer, click ‘I Agree – Begin Download’ and save the file to your computer.
6. Once the download is complete, double-click the file from its download location to begin the installation.
7. Follow the same instructions as when using the Setup CD-ROM. See the previous page
6
|